-
Spark Ignition Equipment for Testing the Electric Blanket Conform to IEC60335-2-17 1. Introduction The electric blanket spark ignition test apparatus is an important equipment specifically designed to test the flame retardancy of electric blankets. It is ...
Spark Ignition Equipment for Testing the Electric Blanket Conform to IEC60335-2-17 1. Introduction The electric blanket spark ignition test apparatus is an important equipment specifically designed to test the flame retardancy of electric blankets. It is ... more
Brand Name:Pego Electronics
Model Number:PG-SIT
Place of Origin:China
-
...Test Apparatus-- Single-Flame Source Test Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame...
...Test Apparatus-- Single-Flame Source Test Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame... more
Brand Name:Hust Tony Instruments
Model Number:HTB-007
Place of Origin:China
Building Material Ignitability Test Apparatus-- Single-Flame Source Test
-
...core principle of Kleinbrenner in Germany. It uses standard flames to conduct vertical direct combustion tests on samples to accurately evaluate the combustion characteristics of building materials. The equipment fully covers the detection requirements of
-
... to ignition by a small flame, with surface ignition and edge ignition. Feature The combustion chamber is made from corrosion resistant stainless steel, to maximize operating life. It has large ...
-
... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length 20 mm)
-
... 11925-2 standard. It uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C, D, E, Bfl, Cfl, Dfl and
-
ISO 11925-2 Single-flame Source Test Apparatus Application: It is mainly applicable to test methods to determine whether building materials have flammability under specified conditions. Standard: GB/ T 8626-2007 GB/ T 10801.2-2002 EN ISO 11925-2 DIN 4102 ...
-
... Tester for Single Flame Source Test emerges as a crucial tool. This advanced piece of equipment is designed to meticulously assess the ignitability and flammability characteristics of building materials, providing ...
-
... material has flammability under the specified conditions and is developed according to the technical parameters specified by the national standard GB8626. The test furnace is in a normal combustion environment, with a small flame direct impact on the
-
Building Material Flammability Test Furnace with Touch Screen Control Description The building materials flammability test furnace is in the normal combustion environment, with a small flame directly impacted the vertical specimen to determine the ...
Building Material Flammability Test Furnace with Touch Screen Control Description The building materials flammability test furnace is in the normal combustion environment, with a small flame directly impacted the vertical specimen to determine the ... more
Brand Name:SKYLINE
Model Number:SL-FL15
Place of Origin:China
Single Flame Source Test Ignitability Tester EN ISO 11925-2/DIN 53438
-
... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length 20 mm)
-
ISO 11925-1 ISO 11925-2 Flammability Test Equipment Building Material Inflatability Testing Machine with Single Flame Source Scope of use: Touch screen control building materials flammability test furnace uses a stainless steel box, which is based on the ...
-
...flame propagation properties Test apparatus for material for rail train Description ASTM E162 is one most widely used test standard to evaluate the propagation properties of material in USA. The heat resource use gas radiant panel heating and a gas burner ignited. This method is widely used in flame propagation properties of the test material for rail train material to evaluate flame...
...flame propagation properties Test apparatus for material for rail train Description ASTM E162 is one most widely used test standard to evaluate the propagation properties of material in USA. The heat resource use gas radiant panel heating and a gas burner ignited. This method is widely used in flame propagation properties of the test material for rail train material to evaluate flame... more
Brand Name:kingpo
Model Number:FTech-ASTM162
Place of Origin:china
Astm E162 / Astm D 3675 Radiant Panel Flame Spread Test Apparatus For Material Of Rail Train
-
Description: This Radiant Panel Flame Spread Test Apparatus is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-...
Description: This Radiant Panel Flame Spread Test Apparatus is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-... more
Brand Name:HOOHA
Place of Origin:China
Certification:ASTM E 162,ASTM D 3675
ASTM E162 Radiant Panel Flame Spread Test Apparatus Surface Flammability Tester
-
Computerized Single-Column Tensile Test Apparatus for Metal Tensile Testing Application: The Computerized Single-Column Tensile Test Apparatus mainly used for testing of metal and non-metal materials, such as rubber, plastic, wire and cable, fiber optic ...
-
IEC 62196 Misalignment Test Apparatus for Electric Vehicle Accessories Product Information: This misalignment test apparatus conforms to IEC62196-3 clause 36.3, figure 18. During temperature rise test, immediately following temperature stabilization, the ...
-
Bags Drop Test Machine Dould Wings , Travel Case Falling Drop Durability Test Usage: Put the load luggage, travel bag, in accordance with the provisions to make its natural fall after the height of the rules, make sample impact oscillation, check sample ...
-
MITECH Digital Hardness Tester 934-1 Barcol impressor with single bracket Product Overview MITECH 934-1 Barcol impressor, based on mechanical pressure principle, its intelligent design making it possible to test the hardness on site conveniently and ...
-
...Flame Resistance Test Apparatus Product information: This apparatus conforms to the standard requirement of IEC60320-1-2. It is applicable for vertical combustion test of the single electric wire or cable. It is used to measure the combustion characteristic of insulation. The burning time can be preset according to the specimen. It is convenient to adjust the flame...
...Flame Resistance Test Apparatus Product information: This apparatus conforms to the standard requirement of IEC60320-1-2. It is applicable for vertical combustion test of the single electric wire or cable. It is used to measure the combustion characteristic of insulation. The burning time can be preset according to the specimen. It is convenient to adjust the flame... more
Brand Name:HongCe
Model Number:VF-1
Place of Origin:China
IEC60320-1-2 Electric Wire Flame Test Apparatus For Vertical Combustion
-
...Flame Resistance Test Apparatus Product information: This apparatus conforms to the standard requirement of IEC60320-1-2. It is applicable for vertical combustion test of the single electric wire or cable. It is used to measure the combustion characteristic of insulation. The burning time can be preset according to the specimen. It is convenient to adjust the flame...
...Flame Resistance Test Apparatus Product information: This apparatus conforms to the standard requirement of IEC60320-1-2. It is applicable for vertical combustion test of the single electric wire or cable. It is used to measure the combustion characteristic of insulation. The burning time can be preset according to the specimen. It is convenient to adjust the flame... more
Brand Name:KINGPO
Place of Origin:Mainland China
Minimum Order Quantity:1
IEC60320-1-2 Vertical Combustion Flame Test Apparatus For Single Wire