8 Ports Gigabit Fiber Switch With POE 30W And 1 Uplink SFP Port Din Rail

Gigabit POE Fiber Switch 8 Ports With POE 30W And 1 Uplink SFP Ports

Introduction of Gigabit POE Fiber Switch

IM-FP188GE is the 10/100/1000 Mbps industrial POE fiber switch, comply with IEEE802.3af/at, power on POE IP cameras through the Ethernet cable, simple construction, power range up to 100 meters, operating temperature-40 ℃ to + 75 ℃, meet IP44 protection degree and EMC industrial grade requirements, DIN rail installation, pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial grade design could ensure continuous and stable operation of the automation system.

Key Features of Gigabit POE Fiber Switch

1. Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.
2. IEEE 802.3af /at power on to 1 ~ 8RJ45 ports
3. 8 x 10/100/1000Mbps Auto-sensing RJ45 ports
4. 1 x 1000Mbps SFP fiber port
5. 6 KV Ethernet surge protection, adapt to a harsh outdoor environment
6. Support Auto MDI/MDIX
7. Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
8. IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
9. Max power to15.4W under af standard, 30W under at standard to each PoE port
10. Detect the PoE models of electrical equipments.

Specification of Gigabit POE Fiber Switch

Industry Standards

EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3,EN 61000-4-8

Traffic Control: NEMA-TS2

Vibration:IEC 60068-2-6

Freefall:IEC 60068-2-32

Shock:IEC 60068-2-27

Rail Traffic: EN 50121-4

Packing of Gigabit POE Fiber Switch

1. One product, one user manual, and one warranty card are in one box.

2. 20pcs boxes are in one carton. (67*33*47cm)

Lead Time of Gigabit POE Fiber Switch

Application of Gigabit POE Fiber Switch

Photo of Gigabit POE Fiber Switch