17.2r/min 6 Cube Slurry Mixers for Aerated concrete arenaceous powder

AAC line capacity,AAC line capacity from 50000m3 to 450000m3

Capacity decided by mould size :

Mould have 4.2m 4.8m 5m 6m

50000-150000m3 Yearly capacity,Usually use 4.2m mould

150000-250000m3 Yearly capacity,Usually use 4.8m,5m mould

250000-450000m3 Yearly capacity,Usually use 6m mould

Slurry Mixer

Application:

The Six-cube Slurry Mixer (refer to the photo and drawing) is especially used to mix the lime, Steam Aerated concrete arenaceous powder, water completely to form slurry.

Technical Parameter:

1.Max size

L:3980 mm W:3000 mm H:3108mm

2. Weight:~2500kg

3. Helical gear reducer

a) Type:CRM147-84.5-Y-11-V1

b) Motor:Y160M-4 power 11KW rotate speed:1460r/min

c) speed ratio:i=84.5

4. Mixing speed:17.2r/min

Working principle:

The twenty-cube mortar mixer is used to mix the lime, Steam Aerated arenaceous powder, water completely to form slurry. Mixer is driven by helical gear reducer, which rotate counterclockwise from up to down.

Structure:

The mixer is composed of helical gear reducer, channel steel frame, and paddle wheel, etc.

Channel steel frame is made of 20# channel

It is equipped with helical gear reducer.

Paddle wheel is made of steel pipe, plate and mixer shaft.

Pilot running and debugging:

1.Pilot running

Reducer can rotate without abnormalities, no jamming and no weird noise. Mixer can rotate in balance, no inclining, no swaying.

2.Adjust

a.If the reducer is jammed or there is weird noise, please disassembly and then check the pad of its bearing pedestal.

b.If the mixer is inclining or swaying, please try to debug with a pad between bearing pedestal and beam frame.

Maintenance and repair:

1.Maintenance

a.Please make sure that there is no slurry in the basin before stop working. Otherwise, the mixer may be damaged because of slurry sedimentation.

b.Please check lubricating oil of the reducer and to fill timely. Normally, lubricating oil is expected to be changed after six months.

c.To clean the mixer and its basin after every day’s work.

2.Repair

Please check all fasteners to avoid any possible loose and change worn parts.

Cautions:

Please turn off power and stop mixing before you start to clean up the mixer.

Formerly known as Wuxi SANKON Automation Equipment Co., Ltd., Jiangsu SANKON Building Materials Technology Co. is an enterprise specializing in the research and development and production of a complete range of autoclaved aerated concrete (AAC) machines and AAC production lines. Since 2007, we have introduced a number of new types of building materials equipment. We have been actively analyzing cutting-edge technology from all over the world and have formed a professional technology team focused on the development of new and exciting processing equipment.

In July, 2014, Jiangsu SANKON Building Materials Technology Co., Ltd. was officially founded in Chuanjiang Town, Xinbei District, Changzhou City, Jiangsu Province, with a factory covering 44700 square meters. Today, we have more than 200 employees. The AAC machines manufactured by SANKON has been exported to a wide range of countries, like Russia, India, Iran, Saudi Arabia, Malaysia, Indonesia, Thailand, Vietnam, the United Arab Emirates, and more.

Professionalism
SANKON has always focused on the design and production of high efficiency AAC machines, resulting in the accumulation of valuable experience and engineering techniques.

Our technical team is made up of experts with more than 20 years of experience in the AAC industry. They are professionals with expertise in project design, production processes, and detail control. Some of them worked for the China AAC Institute before they came to SANKON, then they focused all of their efforts into the AAC industry.

With this excellent technical team, we are able to offer clients solutions and equipment that meets all relevant production quality requirements, as well as help building materials manufacturers maximize their economic returns.

Autonomous Production
With an annual production capacity of more than 9 thousand tons of equipment and workshops covering about 25 thousand square meters, SANKON is able to autonomously complete machining, painting, assembling, and testing processes. Parts like metal bodies, hydraulic pressure stations, electric control cabinets and so on are all produced by SANKON.

We are able to offer complete sets of equipment for AAC production line. SANKON is also able to precisely control the function and quality of each piece of equipment to meet customer needs.

Continuous Innovation
Based on German technology, we developed the AAC production lines with additional specifications. At the same time, we have been consistently improving our equipment offerings to meet the various needs of customers.

For instance, the blade used in the pouring mixer was updated from a conventional single blade to a cross blade and flow diversion blade, and now the high speed double blade design results in higher stirring efficiency. The driving method is updated from belt drive to variable frequency drive as it is now directly connected. Besides, each connecting piece is fine finished by us.

Currently, SANKON has obtained 19 patents for components applied in our AAC cutter, mold, transfer cart for AAC block pre-curing and batching automatic control system.

Market Prospect
For many years, SANKON has been focusing on the research and development of AAC machines, as well as collaborating with AAC product manufacturers and providing AAC production line solutions to these AAC product manufacturers. We have served hundreds of clients in the building materials industry and have achieved wide praise.

In recent years, we have developed quickly and achieved production value of tens of millions of dollars.