Home > Industrial Controls >

16 Point Control Interface Module IC693MDL645 24 Volt DC Positive / Negative Logic Input

Categories	Redundant Power Supply Module
Brand Name:	GE Fanuc
Model Number:	IC693MDL645
Place of Origin:	USA
MOQ:	1
Price:	negotiable
Payment Terms:	T/T, Western Union
Delivery Time:	2-3 work days
Packaging Details:	New in original box
Brand:	GE Fanuc
Model 1:	IC693MDL645G
Model 2:	IC693MDL645E
Model 3:	IC693MDL645F
Model 4:	IC693MDL645D
Model 5:	IC693MDL645H
Model 6:	IC693MDL645J

Contact Now

Add to Cart

Product Details
Company Profile

16 Point Control Interface Module IC693MDL645 24 Volt DC Positive / Negative Logic Input

Redundant Power Supply Module IC693MDL645 24 Volt DC Positive/Negative Logic Input, 16 Point

Rated Voltage 24 volts DC
Input Voltage Range 0 to +30 volts DC
Inputs per Module 16 (one group with a single common)
Isolation 1500 volts between field side and logic side
Input Current 7 mA (typical) at rated voltage
Input Characteristics
On-state Voltage 11.5 to 30 volts DC
Off-state Voltage 0 to +5 volts DC
On-state Current 3.2 mA minimum
Off-state Current 1.1 mA maximum
On response Time 7 ms typical
Off response Time 7 ms typical
Power Consumption: 5V 80 mA (all inputs on) from 5 volt bus on backplane
Power Consumption: 24V 125 mA from the Isolated 24 volt backplane bus or
from user supplied power

The 24 volt DC Positive/Negative Logic Input module for the Series 90-30 Programmable Logic Controller provides 16 input points in one group with a common power input terminal. This input module is designed to have either positive logic or negative logic characteristics. Input characteristics are compatible with a wide range of user-supplied input devices, such as pushbuttons, limit switches, and electronic proximity switches. Current into an input point results in a logic 1 in the input status table (%I). Power to operate the field devices can be supplied by the user, or an Isolated +24 VDC supply on the power supply (+24V OUT and 0VOUT terminals) can power a limited number of inputs.

LED indicators which provide the ON/OFF status of each point are located at the top of themodule. This LED block has two horizontal rows with eight green LEDs in each row; the top row labeled A1 through 8 (points 1 through 8) and the bottom row labeled B1 through 8 (points 9 through 16). An insert goes between the inside and outside surface of the hinged door. The surface towards the inside of the module (when the hinged door is closed) has circuit wiring information, and circuit identification information can be recorded on the outside surface. The outside left edge of the insert is color-coded blue to indicate a low-voltage module. This module can be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system

The following figure provides wiring information for connecting user supplied input devices and power source to the 24 volt DC positive/negative logic input module

Figure 6-11. Field Wiring - 24 Volt DC Positive/Negative Logic Input Module -IC693MDL645

Similar Products

IC660BLM506 Bus Terminator 150 Ohm (Qty 4)
IC660BLM508 Bus Terminator 75 Ohm (Qty 4)
IC660BBA020 Block 24/48Vdc Analog 4 Inputs / 2 Outputs
IC660BBA024 Block 24/48Vdc Analog Current Source 4 Inputs / 2 Outputs
IC660BBA025 Block 24/48Vdc Analog Current Source 6 Outputs
IC660BBA026 Block 24/48Vdc Analog Current Source 6 Inputs
IC660BBA100 Block 115Vac Analog 4 Inputs / 2 Outputs
IC660BBA104 Block 115Vac/125Vdc Analog Current Source 4 Inputs / 2 Outputs
IC660BBA105 Block 115Vac/125Vdc Analog Current Source 6 Outputs
IC660BBA106 Block 115Vac/125Vdc Analog Current Source 6 Inputs
IC660BBD020 Block 24/48Vdc Source I/O 16 Circuits, 3 Wire Sensor Compatible
IC660BBD021 Block 24/48Vdc Sink I/O 16 Circuits, 3 Wire Sensor Compatible
IC660BBD022 Block 24Vdc Source I/O 16 Circuits, 2/3 Wire Sensor Compatible
IC660BBD023 Block 24Vdc Sink I/O 16 Circuits, 2/3 Wire Sensor Compatible
IC660BBD024 Block 12/24Vdc Source I/O 32 Circuits
IC660BBD025 Block 5/12/24Vdc Sink I/O Block 32 Circuits
IC660BBD101 Block 115Vac I/O Low Leakage 8 Circuits
IC660BBD110 Block 115Vac Input 16 Circuits
IC660BBR100 Block Relay Output Normally Closed 16 Circuits
IC660BBR101 Block Relay Output Normally Open 16 Circuits
IC660BBA021 Block 24/48Vdc RTD Input 6 Channels
IC660BBA023 Block 24/48VdcThermocouple Input 6 Channels
IC660BBA101 Block 115Vac/125Vdc RTD Input 6 Channels
IC660BBA103 Block 115Vac/125Vdc Thermocouple Input 6 Channels
IC660BBD120 Block High Speed Counter

OTHER SUPERIOR PRODUCTS

Yasakawa Motor, Driver SG-	Mitsubishi Motor HC-,HA-
Westinghouse Modules 1C-,5X-	Emerson VE-,KJ-
Honeywell TC-,TK-	GE Modules IC -
Fanuc motor A0-	Yokogawa transmitter EJA-

Contact person: Anna

E-mail: wisdomlongkeji@163.com

Cellphone: +0086-13534205279

Product Tags:


*From:	Your email address is incorrect!
*To:	Shenzhen Wisdomlong Technology CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

16 Point Control Interface Module IC693MDL645 24 Volt DC Positive / Negative Logic Input

16 Point Control Interface Module IC693MDL645 24 Volt DC Positive / Negative Logic Input

16 Point Control Interface Module IC693MDL645 24 Volt DC Positive / Negative Logic Input

analog interface module

diode redundancy module

16 Point Control Interface Module IC693MDL645 24 Volt DC Positive / Negative Logic Input