| Categories | EV Battery Testing Equipment |
|---|---|
| Brand Name: | Sinuo |
| Model Number: | SN552C |
| Certification: | Calibration Certificate (Cost Additional) |
| Place of Origin: | China |
| MOQ: | 1 |
| Price: | Customized |
| Payment Terms: | T/T |
| Supply Ability: | 1 sets/month |
| Delivery Time: | 45 days |
| Packaging Details: | Other |
| Inner box size: | 500*500*500 (D*W*H) |
| Outer box size: | 710*780*2060mm (W*D*H) |
| The bottom load capacity: | 150KG |
| Other layer load capacity: | 50KG |
| Inner box thickness: | 1.00MM |
| Outer box thickness: | 1.5MM |
Charge and Discharge Test Battery Explosion-proof Test Chamber
Equipment Overview
The battery explosion-proof box is mainly used during battery overcharge and over-discharge &charge and discharge tests, for protection of the operator and the instrument.
The battery is placed in the explosion-proof box, the charge and discharge test equipment is external and should be prepared by user, not included in this explosion proof chamber,.
Technical Parameters
| Equipment size | Test chamber size per layer: 500*500*500 (D*W*H),( Three zones structure, can be customized) Outer box size: 710*780*2060mm (W*D*H) |
| Equipment Material | Outer box: 1.5MM thick cold-rolled plate and high-temperature double-sided baking paint treatment. Inner box: SUS # 304 stainless steel, thickness 1.00MM thick. |
| Box load-bearing capacity | The bottom load capacity is not less than 150KG, the second/third layer load capacity is not less than 50KG |
| Equipment box door | Single door, double door, inner box door is made of stainless steel, and add silicone strip to tighten, open visual observation window on the front. The door is connected to the box by strong hinges, while each door adds an explosion-proof hinge, the right end of the chain is fixed in the latch side to prevent the explosion-proof box and door separation, effectively protecting the safety of testers. |
| Observation Window | Double tempered glass, tempered glass thickness of 10MM, double tempered glass between the addition of steel wire grid in the explosion can do traction, while preventing the glass explosion when the glass splash injury testers situation. Observation window sealing using 3M glass adhesive for sealing. |
| Box protection | The test chamber is fully laminated with Teflon tape inside to effectively prevent corrosion, insulation, flame retardant and easy to clean. |
| Wire loading port | Each layer of the box on the left and right sides of each open a round loading line mouth, Ф50MM diameter, easy to test the connection line through. |
|
EV Lithium Ion Battery Testing Equipment UL 2580 Cell Vibration Testing Equipment
1000A EV Battery Testing Equipment UL2580 Cells External Short Circuit Testing Equipment
Lithium Ion Cells Thermal Abuse Heating Oven EV Battery Testing Equipment UL2580
IEC 62133 EV Battery Testing Equipment UL2580 RESS 100kN Crush Testing Equipment
UL2580 EV Lithium Battery Cells Low Pressure Altitude Simulation Testing Equipment
UL2580 Lithium EV Battery Testing Equipment Mechanical Shock Testing Equipment
PLC Electric Vehicle Battery Testing Equipment Lithium Ion Battery Cell Drop Tester
1KN 20KN EV Battery Testing Equipment UL2580 Lithium Battery Cell Testing Equipment
DIN40050-9 Electric Vehicle Power Battery Pack IPX9K Waterproof Test Laboratory
UL2580 EV Lithium EV Battery Testing Equipment Cell Heavy Weight Impact Tester
