TLE2426IDR Precision Virtual Ground Reference IC with ±0.05% Accuracy 1mA Output 1.4V to 40V Wide Input Low TC (35ppm/°C) and Short-Circuit Protection for Single-Supply Systems

TLE2426IDR Precision Virtual Ground Reference IC with ±0.05% Accuracy 1mA Output 1.4V to 40V Wide Input Low TC (35ppm/°C) and Short-Circuit Protection for Single-Supply Systems

Features

1/2 VI Virtual Ground for Analog Systems

Self-Contained 3-terminal TO-226AA Package

Micropower Operation...170 µA Typ, VI = 5 V

Wide VI Range...4 V to 40 V

High Output-Current Capability

− Source...20 mA Typ

− Sink...20 mA Typ

Excellent Output Regulation

− −45 µV Typ at IO = 0 to −10 mA

− +15 µV Typ at IO = 0 to +10 mA

Low-Impedance Output...0.0075 Ω Typ

Noise Reduction Pin (D, JG, and P Packages Only)

Applications

1. single-supply op-Amp circuits
Generates a virtual ground (VCC/2) for single-supply operational amplifiers (e.g. TLE202x, TLV series), eliminating the need for dual power supplies.
Typical Use Cases: Signal conditioning, sensor interfaces, audio pre-amplification.

2. Data Acquisition Systems (DAQ)
Provides a stable mid-rail reference for ADC/DAC circuits, enabling bipolar signal swing (e.g.+2.5V from a 5V single supply).
Typical Use Cases: Industrial sensors, biomedical instruments.

3.Portable/Battery-Powered Devices
Low quiescent current (400uA) and wide input voltage range (1.4V to 40v) make it ideal for battery-operated applications with voltage fluctuations.
Typical Use Cases: Handheld meters, wireless sensor nodes.

4. Automotive Electronics
AEC-Q100 qualified for reliable performance in high-temperature and high-vibration environments, suitable for vehicle power management and sensor signal processing.

5. Test & Measurement Equipment
High accuracy (+0.05%) and low temperature drift (35ppm/°C) ensure stable voltage references in multimeters, oscilloscopes, and other precision instruments.

Description

In signal-conditioning applications utilizing a single power source, a reference voltage equal to one-half the supply voltage is required for termination of all analog signal grounds. Texas Instruments presents a precision virtual ground whose output voltage is always equal to one-half the input voltage, the TLE2426 “rail splitter.”

The unique combination of a high-performance, micropower operational amplifier and a precision trimmed divider on a single silicon chip results in a precise VO/VI ratio of 0.5 while sinking and sourcing current. The TLE2426 provides a low impedance output with 20 mA of sink and source capability while drawing less than 280µA of supply current over the full input range of 4V to 40V. A designer need not pay the price in terms of board space for a conventional signal ground consisting of resistors, capacitors, operational amplifiers, and voltage references. The performance and precision of the TLE2426 is available in an easy-to-use, space saving, 3-terminal LP package. For increased performance, the optional 8-pin packages provide a noise-reduction pin. With the addition of an external capacitor (CNR), peak-to-peak noise is reduced while line ripple rejection is improved.

Initial output tolerance for a single 5-V or 12-V system is better than 1% with 3.6% over the full 40-V input range. Ripple rejection exceeds 12 bits of accuracy. Whether the application is for a data acquisition front end, analog signal termination, or simply a precision voltage reference, the TLE2426 eliminates a major source of system error.

INFORMATION

Drawing

Our advantage :

• High quality products --- our offers are 100% new and original, ROHS
• Competitive price --- good Purchase channels with good price.
• Professional service --- strict quality testing before the shipment, and perfect after-sales service after the purchase.
• Adequate inventory --- With the support of our strong Purchasing team,
• Fast delivery --- we will ship the goods within 1-3 working days after the payment confirmed.

be sure to meet your need for all kinds of components. ^_^


Product List
Supply a Series of Electronic Components, full range of semiconductors, active & passive Components.We can help you to get all for bom of the PCB,IN a word, you can get one-stop solution here,


The offers including:
Integrated Circuit, Memory ICs, Diode, Transistor , Capacitor, Resistor, Varistor, Fuse, Trimmer & Potentiometer, Transformer, Battery, Cable, Relay, Switch, Connector, Terminal Block, Crystal & Oscillator, Inductor, Sensor, Transformer, IGBT Driver, LED,LCD, Convertor, PCB (Printed Circuit Board),PCBA (PCB Assembly)

Strong in Brand:
Microchip, MAX, AD, TI, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc

Thank you for your time to know our company and lean our production.

TOP Electronic Industry co., Ltd  was established in 2006. After 10 years effort and development, now we have become one of the leading electronic components distributors in China. We keep very kind relationship with our suppliers and partners, and put our customers in the first place always.

Here we can offer one-stop solution service:  from PCB design, production to PCB assembly, from a series of components offer to the BOM list.

In addition to its component supply service, TOP distributes industry respected communication modules(GPS,GSM/GPRS,3G,LTE 4G modules) and accessories. All the brands are very famous and welcome by the customers all over the world, they are including: Sierra Wireless, SIMCOM, CINTERION, U-BLOX, HUAWEI, ZTE,TELIT, HOLUX etc. competitive price, Adequate  inventory, fast delivery, be praised by all the customers .

As an innovative company, TOP supplies and  markets high-quality wireless communication antennas and RF-cables. to work with modules together. With more than 8 years antenna experience, we win a lot of stable customers from more than 50 countries. In order to save the cost and delivery time, control the quality, supply the competitive price for our customers, we built our own antenna factory in 2012,which is for developing and manufacturing GPS antenna, GSM/GPRS antenna, WIFI antenna, LTE antenna, all kinds of combo antennas etc. Quality, stability,  accessibility are all important to us.

 The third production-line is Supply a Series of Electronic Components, including Integrated Circuits, Transistor, Diode, LED, LCD display, Capacitor, Resistor, Inductor, Relay, Crystal , Terminal block ,pin header etc.

Our Strong in Brand including Microchip, MAX, AD, TI, NXP, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc

As a global distributor of electronic components, we stocking the world's widest range products of semiconductor and electronic components. You can get one stop service here include BOM(bill of material)  purchasing, testing, design for your project. Our experienced team is providing the most excellent service to meet your needs and satisfaction.

With rich experience on wireless product and electronic components, we win our customers with good quality and competitive price. We only offer the products 100% original from the factory.

 TOP has never stop going forward, we always want to give our customers best service. in 2013, together with our partners, we built another PCB factory. In this factory, we can make design, supply PCB, make PCB SMT and DIP assembly, offer BOM service. As a professional supplier , We have a strong procurement team and are therefore able to provide customers with competitive prices and good quality. This is our advantage to you.

As they are to you. Just as in our name, TOP strives to be a leading business in the electronic industry. Our high quality products and professional service, are sure to meet your need for all kinds of electronic components.

You are searching for creditable and professional supplier to work with; we are also looking for sincerely and long-term customers. Once we find each other, we could make rapid progress together!