Building Material Ignitability Test Apparatus-- Single-Flame Source Test
|
...Building Material Ignitability Test Apparatus-- Single-Flame Source Test Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test......
Dongguan Hust Tony Instruments Co.,Ltd.
|
EN ISO 11925-2 Building Material Ignitability Test Apparatus
|
...er a condition in the absence of external radiation to direct impact of vertically placed samples with a small flame to determine the flammability of this building material products. FEATURES AT A GLANCE Features: 1. Box paint treatment, beautiful. 2. The...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Building Material Ignitability Test Apparatus by Single-flame Source Test
|
...Ignitability Test Apparatus is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. It uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C, D, E, Bfl, Cfl, Dfl and Efl testing. The Ignitability Test Apparatus......
Advanced Instruments Co.,Limited
|
IEC60695-2-10 Glow Wire Test Apparatus With Computer Control Fire Hazard Testing Equipment
|
...Test Apparatus With Computer Control Fire Hazard Testing Equipment Product information: This device is manufactured according to the standard of IEC60695-2-10, IEC 60695-2-11, IEC 60695-2-12, IEC60695-2-13, UL746A, IEC 60335, IEC 60598, etc. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition......
Sinuo Testing Equipment Co. , Limited
|
Single Flame Source Building Material Flammability Testing Apparatus ISO 11925-2
|
... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length ......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
EN ISO 11925-2 Flammability Testing Equipment Building Material Ignitability Test Single Flame Source
|
Building Material Ignitability Test Single Flame Source Flammability Testing Equipment Description: Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
ASTM E1317 IMO Flame Spread Tester Building Material Flammability Test Apparatus
|
...Building Material Flammability Test Apparatus Scope of application: 1.1 applicable to buildings and transportation tools (such as ships, trains, etc.), the exposed surface using flat single material, the surface properties of composite materials or components, and tubular products by special fixed installation and test; 1.2 descrip and measure the characteristics of the materials......
Dongguan HOOHA Electrical Equipment Company Limited
|
PC Control Model ISO 5657 Flammability Tester with 10Kw/m2 ~ 70kW/m2 Irradiance and 50W Output for Building Materials Ignitability Testing
|
... does not exceed 70mm when placed horizontally under specified thermal radiation conditions. It can be used to evaluate wall and ceiling lining materials, flooring systems, exterior cladding and thermal insulation materials for air ducts, etc. In a...
SKYLINE INSTRUMENTS CO.,LTD
|
IEC60695-2-20 Hot Wire Ignition Test Apparatus , Fire Hazard Testing Equipment
|
...Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire of a specific size (Φ0.5 mm* 250 mm) and a specific material......
Pego Electronics (Yi Chun) Company Limited
|
IEC 60335-2-17 Blanket Spark Ignition Test Apparatus for Professional Testing
|
IEC 60335-2-17 Spark Ignition Test Apparatus | Compliant with Standard Certification Product Overview: Professional Flame Retardancy Testing for Electric Blankets This spark ignition test apparatus strictly complies with IEC 60335-2-17 Clause 30.101 ......
KingPo Technology Development Limited
|
Submit your “building material ignitability test apparatus” inquiry in a minute :