SMPS Power Supply Burn In Chamber High Power Feedback Burn In Cabinet
|
SMPS Power Supply Burn In Chamber High Power Feedback Burn In Cabinet Application Scope Suitable for burn-in of adapters, industrial power supplies, LED power supplies, server power supplies, communication power supplies, and SSN and NPS power supplies......
Shenzhen CPET Electronics Co., Ltd.
|
Fire Flame Plastic Burning Test Chamber UL 94 Standard AC 220V 50Hz 35～98%RH
|
... of Plastic Material Specified for Manufacturing Equipment and Parts, GB/T2408-1996 Testing Method of Burning of Plastic Material: horizontal and vertical as well as the relevant clauses in IEC60065 for a purpose of testing the burning characteristics of...
Infinity Machine International Inc.
|
IEC 60335-1 Clause 30 Cellular Plastic Materials Horizontal Burning Test Chamber
|
...Burning Test Chamber Product information: This test chamber is designed and manufactured according to the standard and related requirement of ISO9772-2001, UL94, it is required by IEC 60335-1 clause 30. This international standard specifies a small-scale laboratory screening procedure for comparing the relative burning......
Sinuo Testing Equipment Co. , Limited
|
High Temperature Aging Test Chamber ISO，Burn In Chamber For Air Conditioning System
|
...to 38% energy. The chamber can be used for online testing of new energy vehicle cabin and air conditioning system.It can be used for high temperature test,low temperature ......
Shenzhen Douwin Technology Co., Ltd.
|
Horizontal / Vertical Burning Test Chamber Spray Tank , 180×560mm Specimen Holder
|
Horizontal And Vertical Burning Test Chamber Flammability Testing Equipment Principle: A defined ignitions flame from a specified burner is applied for a defined period of time to textile specimens which are ......
Guangzhou HongCe Equipment Co., Ltd.
|
Electronic Glow Wire Flammability Test Apparatus Horizontal Burning Tester Chamber
|
Glow Wire Flame Test Chamber With Manual Control Product Description This testing machine is mainly used to simulate the thermal stress caused by heat sources or ignition sources such as hot components or overloaded resistors in a short time under fault......
Guangdong Guangce Instrument Technology Co., Ltd
|
Battery Burning Test Chamber Flammability Tester For Lithium Ion Batteries / New Energy Batteries Fire Test Equipment
|
... on the wire mesh screen, install an octagonal aluminum mesh around the sample, and then ignite the burner heats the sample until the battery explodes or the battery burns, and the...
Dongguan Haida Equipment Co.,LTD
|
Battery Burning Test Chamber Flammability Tester For Lithium Ion Batteries / New Energy Batteries Fire Test Equipment
|
|
... on the wire mesh screen, install an octagonal aluminum mesh around the sample, and then ignite the burner heats the sample until the battery explodes or the battery burns, and the...
Hai Da Labtester
|
UN ECE R118 (Rev. 2) Annex 6 / ISO6941 Vertical Burning Test Chamber
|
Principle This test consists of exposing samples, held in a vertical position, to a flame and determining the speed of propagation of the flame over the material to be tested. Scope and field of application: This international standard specifies a method......
KingPo Technology Development Limited
|
High Temperature Accelerated Aging Burn In Test Chamber IEC 60068-2-2:2007
|
...Burn in Test Chamber Manufacturers Applications of burn-in chambers DGBELL's burn-in chambers are widely used for constant temperature reliability testing of automotive parts, electronic and electrical products, components and materials. It can also be used for other objects that require high temperature testing, such as pharmaceuticals, aircraft, etc. Our burn-in chambers...
Guangdong Bell Experiment Equipment Co., Ltd
|