Standard EN 1022 EN 1729 Chair Seats Stability Testing Machine TNJ-023
|
...seats (such as chairs, office chairs) forward stability. Principle: Put the test-piece on the test table, blocked the front leg, apply specified force with forward 20N applied at seat loading point, check the article tends to overturn forward or not to...
Dongguan Hust Tony Instruments Co.,Ltd.
|
BIFMA X5.1 Office Chair Seat Stability Tester to Evaluate the Front and Rear Stability of Chairs
|
... tests is to evaluate the front and rear stability of chairs. Principle Put the test-piece on the test table, blocked the front leg, apply specified force with forward 20N applied at seat loading point, check the article tends to oventurn forward or not...
SKYLINE INSTRUMENTS CO.,LTD
|
Air Pressure 0-150 Ib Electronic Chair Swivel Durability Testing Machine
|
...10%, 50/60Hz (can be appointed) Gross Weight: 750kg EQUIPMENT DESCRIPTION The machine is designed to test seating and back by specified load block with setting force and speed to assess chair seating and back durability. DESIGN STANDARD: EN 1728; EN 1335;...
Dongguan Haida Equipment Co.,LTD
|
30 ~ 65cm Furniture Testing Machine / Chair Stability Test Equipment BS EN 581-2
|
...Chair Stability Test Machine Furniture Testing Machine BS EN 581-2 Description: This stability test apparatus used to test the stability performance for chairs seating. Standard: EN 1022:2005, BS EN 1335-3:2009 5.9, BS EN 581-2 Test items: Forward stability test: EN1022 6.2 Forwards overbalancing, all seating- EN1022 6.3 Forwards overturning for seating with footrest Sideways stability test EN1022 6.4 Sideways overbalancing, all seating...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
500KG Sliding Resistant Furniture Testing Machine With Steel Plate For Rolling Office Chair
|
...Testing Machine With Steel Plate For Rolling Office Chair Introduction: It's used to do the durability test of desk and chair,it can test 2 items at the same time:desk horizontal durability test and chair seat bending durability test. Testing standards: According to EN 1335-3,EN 581 2,EN 1728, BIFMA X5.1,can do chair bending durability test,According to EN 527-3 and EN......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
EN 1728 ISO 7173 PLC Control Chair Testing Machine
|
Furniture Chair Seating and Back Testing Machine Application The tester tests the strength and durability of the seats and backrests by simulating the routine use loading of the seat. The machine is equipped with two drive units, and can be individually ......
Gester International Co., Ltd
|
BIFMA Chair Stability Testing Equipment Maximum Capacity 150KG 6 Bar
|
...used for furniture mass production of the early stage of r & d testing and later quality testing. 2.Main technicl parameters: 1.Applications: the machine suits for the standard which is EN 1022,EN1792,BIFMA X5.1,and EN581-2,and it is used to auto-test the...
Hai Da Labtester
|