Conventional MCP Manual Fire Alarm for Buildings & Emergency Preparedness
|
... component of a fire alarm system that allows building occupants to manually trigger the fire alarm in the event of an emergency. Here's a more detailed explanation of the function of a conventional pull station: Alarm Activation: The primary function of...
Shenzhen Xinhe'an Technology Co., Ltd.
|
Fire Fighting Equipment Break Glass Manual Fire Alarm Call Point
|
... Resistance ≤0.2ohm Temp. Range -10℃~+50℃ Max. Relative Humidity ≤93RH±2% LED indicator green for working, red for alarm Type Can't be reset Color Red,Green,Yellow Use school/ hotel/ home..etc...
Mantern Industrial Co., Ltd.
|
Break Glass Manual Fire Alarm Call Point
|
...Manual Fire Alarm Call Point Parameter for break glass manual fire alarm call point: 1. Working voltage: 12/24VDC 2. Power: 10W 3. Switch state: Normally closed open (single or dual) 4. Color: Red, Green 5. Dimensions: 87mm*87mm*51mm . Materical: ABS plastic Color: Red / green/white/yellow (Optional) One year warranty Fire alarm break glass with manual call point Suitable for exit door or emergency door NC/NO/DPDT optional Manual fire...
Yiwu Yidun E-commerce Firm
|
Emergency Break Glass Door Release Manual Fire Alarm Call Point CE Approved
|
CE Approved addressable manual call point , call point break glass Manual Fire Alarm Call Point VI-203 is a Green Color Break Glass Fire Emergency Exit Release Button,Suitable for Exit Door,Emergency Door Product Parameter Parameter Description Abmessungen......
Shenzhen Vians Electric Lock Co.,Ltd.
|
SAP-502 Intelligent Manual Call Point, Manual fire Alarm button with With telephone jack, with telephone line indication
|
◆ Product Features No polarity two-bus transmission manual alarm signal between the controller Stable and reliable work, wide application range Uses address code programmer to write address, no longer ......
Shenzhen Koten Technology Co., Ltd.
|
IP30 Addressable Fire Alarm Panel Conventional Manual Call Point
|
Manual Alarm Point Addressable Fire Alarm System CE ROHS Manual Call Point D135C Asenware Conventional Manual Call Point OVERVIEW The D135C conventional manual call point is designed to be use with an intelligent two-wire control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system which will, after receiving the alarm signal, display the equipment status of the manual......
Beijing HiYi Technology Co., Ltd
|
120dB Fixed alarm manual water alarm SY-200A Chinese mainland. The alarm sound depends on the hand speed
|
...fire alarm equipment is used to alert and remind in case of emergency. The fire alarm equipment is made of aluminum alloy, light weight and durable. The weight of the equipment is only 3kg, which is easy to install and use. The sound pressure level of this fire alarm device can reach 120dB, which is sufficient to warn the personnel in the building. It can be used to alert people in an emergency. The fire alarm......
Shandong Jvante Fire Protection Technology Co., Ltd.
|
Built - In FM200 Fire Alarm System Module
|
... and avoid mistakes. Connect conventional detector, manual call point or fire hydrant button, and deliver the alarm signal to the controller. Gas fire extinguishing system and fire alarm equipment linkage debugging has been completed, when a fire occurs in...
Guangdong Dingya Fire Equipment Co.,Ltd
|
DC 24V 2 wire conventional fire alarm systems manual call point,break glass
|
...fire alarm systems manual call point,break glass Available for flush or surface mounting Plastic film on glass Test key inserted from side Open circuit with series resistor Suitable for the majority of conventional fire alarm systems Specifications: System Voltage (nominal): 24 VDC (9V~ 28VDC) Standby Current: 60 μA @ 24VDC Alarm......
Jingo International CO., LTD
|
DC 24V 2 wire conventional fire alarm systems manual call point,break glass
|
|
...fire alarm systems manual call point,break glass Available for flush or surface mounting Plastic film on glass Test key inserted from side Open circuit with series resistor Suitable for the majority of conventional fire alarm systems Specifications: System Voltage (nominal): 24 VDC (9V~ 28VDC) Standby Current: 60 μA @ 24VDC Alarm......
Shenzhen KINGUI Limited
|
Submit your “manual fire alarm system” inquiry in a minute :