1-720°/Min Mechanical Strength Test Device Transmission Shaft Torsion Testing Machine
|
... shaft torsion testing machine Torsion speed 1-720°/min Mechanical Strength Test Applicable standards: GB/T 10128-1998 "Metal torsion test method at room temperature" GB/T 10128-2007 "Metal torsion test method at room temperature......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Multi-position Mobile Manual Release Socket Mechanical Strength Test Device
|
... assembly. Application: Check the mechanical strength of the charging gun cable assembly. Test principle: Use a clamp to fix the sample at a height of 1000mm from the ground and drop it to verify its mechanical strength. Usage environment: Power supply:...
Sinuo Testing Equipment Co. , Limited
|
230V Vertical Hammer 5J Mechanical Strength Test Device Conforms To IEC60068-2-75
|
...5J Mechanical Strength Test Device Product Introduction This vertical impact test apparatus is designed and manufactured according to the standard requirement of IEC60068-2-75 Test Ehc.. It is used to test the enclosure mechanical strength of the household......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 62196-1 Rewireable Plugs and Vehicle Connector Mechanical Strength Testing Equipment
|
...used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable. Test principle is that the free end of the cable and an additional rope or other flexible means, etc., attached to the flexible cable, both...
Sinuo Testing Equipment Co. , Limited
|
IEC 60884-1 Figure 14 Non - Solid Pins Test Device For Mechanical Strength Test Of Pins Of Portable Accessories
|
...ch are not solid, by the following test which is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the ......
KingPo Technology Development Limited
|
Blankets Mechanical Strength Test Apparatus IEC60335-2-17 Figure BB.1 To BB.3
|
...Equipment for the mechanical strength test of blankets 1. Introduction The blankets mechanical strength test apparatus is designed according to IEC60335-2-17 clause 21.102 and Annex BB.1 to BB.3. It’s used for mechanical strength test by simulating the ......
Pego Electronics (Yi Chun) Company Limited
|
GJB150 GJB548 Mechanical Strength Test Machine User Friendly Operation
|
...-STD-883E, MIL-STD-810F, ISTA, UL Also meet standard JESD22-B104 (condition B: 1500G, 0.5ms). Shock testing systems Applications:...
Dongguan Kingpo Technology Limited
|
ASTM D295 ISO 9290 Manual Tear Strength Tester BS 4253 DIN 53862 Textile Tear Resistance Strength Test Device
|
...fabrics (using the Elmendorf method) is carried out to test the impact tear strength of textiles, woven fabrics, non-woven fabrics, and coated fabrics. It can also be used for the burst strength tests of silk, cotton fabrics, various papers, cardboard, and...
DONGGUAN LONROY EQUIPMENT CO LTD
|
60 G Cone Mass Spring Operated Impact Hammer For Mechanical Strength Test
|
... terms and requirements. Mainly used for household and similar electrical products shell, lever, handle, knobs, lights and other mechanical strength test. Mass of impact: 250 g, cone mass: 60 g, impact energy: 0.2, 0.22, 0.35.0.5, 0.7, 1, 2 (J)...
Guangzhou Kinte Electric Industrial Co.,Ltd
|
Impact Strength Testing Device For Toys Surface Impact Testing With BS EN 71
|
...Strength Testing Device For Toys Surface Impact Testing With BS EN 71 Test Purpose: Reduce the material damage or the danger of imitation toys protection devices as the real face. Application range: Range: imitation protect device (clear material protector, headpiece ,cap, blinker) Comply with Standards: EN 71-1 8.7 impact test......
Dongguan Hust Tony Instruments Co.,Ltd.
|