Particle Reinforced Molybdenum Alloys MHC Molybdenum Hafnium Carbon Alloy
|
... spindle, when the forging deformation is 60%, at 950 ~ 1250 ℃ the tensile strength is high 20% than TZM and the direction elongation is 10%. Application Molybdenum is used in rockets and other aircraft parts, as well as in...
Luoyang Forged Tungsten-Molybdenum Material Co., Ltd.
|
Hot Processing MHC Bar Molybdenum Alloys Hafnium Carbon Alloy Rod Stock
|
...Molybdenum Hafnium Carbon Alloy Rod Molybdenum Hafnium Carbon Alloy Bar Description Molybdenum Hafnium carbon alloy a particle-reinforced molybdenum alloy containing hafnium and carbon. MHC alloy is an upgraded product of TZM alloy, so the Molybdenum Hafnium Carbon Alloy Bar has better creep resistance, tensile strength, heat resistance, corrosion resistance, wear resistance, and durability than TZM alloy......
Luoyang Hypersolid Metal Tech Co., Ltd
|
Mo + 0.40-0.55%Ti + 0.06-0.12%Zr TZM Molybdenum Alloy Disc Tzm Alloy Disc Titanium Zirconium Molybdenum Alloy Disk
|
...Molybdenum Alloy Disc 1. Description of Mo+0.4~0.55%Ti+0.06~0.12%Zr TZM Molybdenum Alloy Disc: TZM molybdenum alloy disc is currently the most excellent molybdenum alloy high temperature material. It is a solid solution hardening and particle reinforced molybdenum-based alloy, TZM is harder than pure molybdenum......
Shaanxi Peakrise Metal Co.,Ltd
|
High Purity 99.95% Molybdenum Alloy TZM Rods With Length 30~3000mm
|
.... It is a solid solution hardened and particle reinforced molybdenum based alloy. TZM is harder than pure molybdenum metal, and has higher recrystallization temperature and better creep resistance. The recrystallization temperature is about 1400 ℃, which...
Zhengzhou Sanhui Refractory Metal Co., Ltd.
|
Molybdenum Copper Sheet Mo80cu20 Alloy Molybdenum Alloy
|
.... The ore is first crushed into small particles by a crusher, then ground into fine powder by a grinder, and finally beneficiated by a flotation machine to separate the impurities and valuable metals. Refining of concentrate: The ......
Zhenan Metallurgy Co., Ltd
|
Non Magnetic Molybdenum Copper Alloy Magnetron Sputtering Target Molybdenum Alloy Target
|
Molybdenum Copper Alloy Magnetron Sputtering Target 1. Description of Molybdenum Copper Alloy Magnetron Sputtering Target: The preparation of molybdenum-copper alloy magnetron sputtering targets is mainly by infiltration method. First, molybdenum powder with coarse particle size is used to sinter into a molybdenum billet skeleton, and then infiltrated in copper liquid to obtain molybdenum-copper alloys......
Shaanxi Peakrise Metal Co.,Ltd
|
Aluminium Molybdenum Alloy Granules Smelting Addtive AlMo10% AlMo60% ingot shape particle shape
|
...Molybdenum Alloy Granules , Aluminum / Magnesium Smelting addtive , AlMo10% AlMo20% AlMo5% Mo: 5% 10% 20% or customized Al balance Product Chemicals(WT)% Ingot shape Impurities Mo Al Fe Si C O Al-Mo10% 10.58 balance 0.092 0.044 0.015 0.072 Other alloys: 1. Mg alloys......
China Hunan High Broad New Material Co.Ltd
|
Moly Copper Alloy Rods Swage Forge Molybdenum Alloy
|
...Alloy Rods Molybdenum Alloy Supplier Molybdenum copper alloy application: molybdenum copper used in spaceflight fields. Molybdenum copper alloy has more excellent performances, so can be used as high temperature part of rockets and missiles. This alloy has high thermal conductivity, thermal expansion, high melting point, and the good mechanical ability, all of these reasons, which make the molybdenum......
JINXING MATECH CO LTD
|
Custom Modern Kitchen Cabinet With Hardware And Particle Board Door Material
|
Custom Modern Kitchen Cabinet with Hardware and Particle Board Door Material Technical Parameters: Product name Carcass Back panel Hinge Drawer runner Adjustable leg Toe kick Wall cabinet 18mm Plywood, MFC,MDF,...
MC WORLD LIMITED
|
Alloy Steel Seamless Tubes Chromium-Molybdenum Alloy Steel A213 T5 Seamless Boiler Tube
|
Alloy Steel Seamless Tubes Chromium-Molybdenum Alloy Steel A213 T5 Seamless Boiler Tube SA213 T5 is a specification for seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes under the ASME SA213/ASTM A213 standard. The T5 grade is a chromium-molybdenum alloy......
Yuhong Group Co.,Ltd
|
Submit your “particle reinforced molybdenum alloys” inquiry in a minute :